Adventure Escape: Space Crisis Walkthrough

Introduction

Adventure Escape: Space Crisis is a spacey escape game created by Haiku Games. Disaster has struck on this space mission, you have to return to Earth! Can you escape? Solve the mystery of the missing crew, investigate the spaceship, look around for clues, find and complete puzzles in order to return home!

Walkthrough

Chapter 1 – Silent Station

 

  • Pick up the keycard. (A)
  • Use the keycard to open the override panel. (B)
  • Click on the manual. (C)
  • The blocks on the manual tell you how to use the manual pilot. (D)

 

  • Click on the manual pilot. (E)
  • The appropriate positions to set the switches in order to turn the ship into manual pilot. (F)
  • After setting the ship into manual pilot, you will have to chart a path around the spaceship. This is the correct way to solve this puzzle. (G)
  • Click on the sign located on the corner. (H)
  • Notice the number 7259 alongside the air test text. It will be used as a hint for the next puzzle. (I)

 

  • Take the two cases with the yellow stripes to have them on the floor. Click on the first yellow case. Collect the probe. (J)
  • Click on the second yellow case. Use the number 7259 in order to unlock it. The device inside it is going to float. (K)
  • Put the blue case to the floor. Collect the star inside it. (M)
  • Go through the door to the right. Open the first hatch. (O)
  • Open the second hatch. (N)
  • Collect the batteries inside the first hatch. (P)
  • Open the box inside the second hatch to collect the screwdriver inside it. (Q)

 

  • Insert the batteries into the air testing device. Use the screwdriver to insert the probe into the device. (R)
  • Tap into the monitor. (S)
  • Tilt your smartphone or tablet to match each of the rings with the hole. (T)
  • Use the air testing device to check the air testing quality. After that, go left and close the door again. The air quality is now good, go back into the right door inside the monitoring room. (U)
  • Chapter Completed.

Chapter 2 – Missing Crew

 

  • Collect the boots. (A)
  • Collect the air tank. (B)
  • Open the compartment. Collect the spray. (C)
  • Open the door ahead of you then go through it. (D)
  • Read the sign. After clicking on the sign on your device, notice the part that says “Toxic Gas 7471”, the number will be used for the next puzzle. (E)
  • Use the number 7471 on the keypad in order to open the door. (G)

 

  • Open the compartment above and collect the hammer. (H)
  • Open the first lower compartment and collect the gloves. (I)
  • Open the second lower compartment and collect the hose. (J)
  • Go to the starting room. Use the hammer to open the closet. (K)
  • Place the gloves and the boots you just found with the rest. The image shows the correct way to sort the space suits. After that, you will get rewarded with a complete spacesuit. (L)
  • Place the air tank near the tap. Use the hose to fill up the empty air tank. (M)

 

  • Go through the door. (N)
  • Open the case. Collect the wench inside it. (O)
  • Open the cabinet. Collect the duct tape. (P)
  • Use the wench in order to remove all of the panels. (Q, R, P)
  • After that, use the spray on the room in order to see where the leak is. After that, patch up the leak on the panel above the door with duct tape. (S)

 

  • Click on the fan panel. (T)
  • Turn on the fan while clicking on the fan icon. (U)
  • Chapter Completed.

Chapter 3 – Hull Breach

 

  • Remove the first panel. (A)
  • Remove the second panel. (B)
  • Collect the hex key. (C)
  • Collect the pincer attachments and the alcohol wipe. (D)
  • Open the door on the right and go through it. (E)
  • Click on the monitor. (F)

 

  • Select X3-725 and type in the numbers 7143. A robotic arm will appear. (G)
  • Remove the panel to find the laser attachment and the plunger attachment.
  • Collect the plunger attachment. (H)
  • Collect the laser attachment. (I)
  • Use the hex wench to remove the panels. Attach the laser attachment to the arm. (J)
  • Use alcohol wipes to clean the glass. (K)
  • Use the hex wench again to remove the second panel. Click on the puzzle. (L)

 

  • The correct way to solve the puzzle and fix the connection in order to get the robotic arm working again. (M)
  • Click into the monitor, move the laser around to find a hole into the metal. When you find it, cut through it to see inside the station wall. (N)
  • Now you need to attach the pincer attachment onto the arm. (O)
  • Click into the monitor again and move the items you find inside the station until you find the dead body. Once you can see the body clearly, the chapter will be completed. (P)
  • Chapter Completed. 

Chapter 4 – Flashback

 

  • Adjust the settings on Jake’s Spacesuit. Set the O2, CO2 and Temp to the ideal levels. (A)
  • Tap the monitor. (B)
  • The correct way to solve the puzzle. (C)

Chapter 5 – Spacewalk

 

  • Collect the clamp. (A)
  • Go to the printing room. Click on the drawer and collect the caliper ruler inside it. (B)
  • Find the tether and collect it. (C)
  • Find the printer material. (D)
  • Place the printer material inside the printer. (E)
  • In order to collect the key inside the printer, click on the green button on the printer to turn it on. After that, you can collect it. (F)
  • Go to the next room on the right. (G)

 

  • Collect the jetpack. (H)
  • Find the tether. Collect it. (I)
  • Use the key to open the safe. (J)
  • Collect the tank with liquid inside it. (K)
  • Collect the hose inside the compartment. (L)
  • Place the tank with liquid onto the garbage disposal. Click on the red button to get rid of the liquid inside it. (M)

 

  • Place the empty tank into the next glass to fill it with fuel. (N)
  • Click on the sign on the middle to get the formula in order to fill the empty tank with fuel. (P)
  • Click on the mixing panel. (Q)
  • Use the colors from the fuel sign in order to fill the tank with fuel. (R)

 

  • Go to the printing room. Place the jetpack onto the scale. (S)
  • Use the clamp to attach the filled tank into the jetpack. Click on the tank and measure the hole while using the caliper ruler. You need to print a 12.5 valve in order to attach the valve and the hose into the jetpack. (T)
  • Click on the printer and type in the numbers 12.5 to create a 12.5 valve. (U)
  • Collect the valve. (V)
  • Place the valve onto the tank and attach the hose onto the tank. (X)

 

  • Click on the green button to balance the jetpack.

 

  • In order to balance the jetpack, you need to solve a riddle. Balance each section of the jetpack so every section adds up to 40. After that collect the improved jetpack. (Y)
  • Go to the airlock room where you found the jetpack.
  • Place the 2 tethers you found into the main tether. (Z)
  • Collect the spacesuit and head out to rescue Jake by the right door. (A1)
  • After getting inside the spaceship. You will be met with a minigame, tap each arrow as it reaches to the bottom until you find Jake. (B1)
  • Chapter Completed.

Chapter 6 – Medic Needed

 

  • Find the scissors and the tape inside the drawers. Collect them. (A)
  • Collect the electric blanket. (B)
  • Collect the medical diagnostic device. (C)
  • Use the medical diagnostic device to determine what’s wrong with Jake. (D)
  • He has Hypercarbia, Broken Ribs and Hypothermia. (E)
  • Read about Hypercarbia treatment. (F)
  • It says that Inspiratory Pressure needs to be set to 11 and Expiratory Pressure needs to be set to 5. (G)

 

  • Use the scissors to remove Jake’s spacesuit, use the tape on his ribs and then put the electrical blanket on him. The end result should be like the image. (H)
  • Click on the ventilator monitor, we need to fix this in order to treat Hypercarbia treatment. (I)
  • The red EP should be 5 and the blue IP should be 11. (J)
  • Click on the note. There is a hint inside it. (K)
  • The hint hides a certain word. The first number of each pair represents a row and the second number of each pair represents a column. The word you are looking for is APOLLO, this word will be used to solve the next puzzle. Collect the fuse inside the locked panel. (L)

 

  • Go to the observatory. (M)
  • Take the air filter. (M)
  • Click on the puzzle. (O)
  • Use the word APOLLO to complete the puzzle. (P)
  • Go to the O2 System Room. Replace the dusty air filter with the air filter you just found. (Q)
  • Find the metal bar. (R)
  • Collect it. (S)

 

  • Use the metal bar to turn the handle. (T)
  • Replace the fuse. (U)
  • Tap on the machine. (V)
  • Get the gauge to point at zero. The image shows you how to do it. (W)
  • Check on Jake and then leave the room. (X)
  • Go through the newly unlocked door. (Y)
  • Chapter Completed.

Chapter 7 – We Have a Problem

 

  • Find the wire. Collect it. (A)
  • Leave the room. (B)
  • Go to the bathroom. Use the button to turn on the shower. The number 7284 will appear on the door. (C)
  • Find the towel. Collect it. (D)
  • Find the grease. Collect it. (E)
  • Wet the towel. (F)
  • Leave the bathroom. Go to the power room. (G)
  • Collect the battery. (H)
  • Use the wet towel to clean the solar panel. After you clean it up, collect it. (I)
  • Click on the monitor. (J)

 

  • Use the number 7281 to determine what symbol should you chose. Select the correct number of dots for each. (K)
  • After unlocking the monitor you have to play a few minigames. The image shows the solution for the first puzzle. (L)
  • The solution for the second puzzle. (M)
  • The solution for the third puzzle. (N)

 

  • The solution for the last puzzle. (O)
  • Go to the airlock room. (P)
  • Use the grease to fix the robotic arm. Take the actuator from it. (Q)
  • Take the suit and jetpack. (R, S)
  • Head out. (T)

 

  • Fix the solar arrays with your solar panel. (U)
  • Place the battery on V-5. (V)
  • Place the wire on C-9. (W)
  • Place the actuator on A-3. (X)
  • Tap on the monitor. (Y)
  • It is time for another minigame. Pass through each arrow only once to bring the solar cells online. Start with the arrow on the image and then follow the direction the arrows are pointing until you go to the center of the screen. (Z)
  • Chapter Completed.

Chapter 8 – Save the Station

 

  • Tap on the monitor. (A)
  • Remember the constellations since you need them to be able to go the next room. (B)
  • Go down the hole on the floor. Tap on the constellations in the order that you saw on that monitor until you go to the next room. (C)
  • Collect the star shaped wrench. (D)
  • Find the sealant and the wire cutter. Collect it. (E)
  • Find the key. Collect it. (F)

 

  • Tap on the solar system poster. (G)
  • Learn the planet order as it is used as a hint for the next puzzle. (H)
  • Use the star shaped wench to remove all of the covers from the fans, and then use the wire cutters to cut the disorganized wires. (I)
  • Click on the puzzle. (J)

 

  • Tap the planets in order so you solve the puzzle. (K)
  • Collect the gears. (L)
  • Use the key to unlock the panel. Click on it to solve a puzzle. (M)
  • Place the gears in the order used on the image to solve the puzzle. (N)

 

  • Collect the scanner.

 

  • Go out through the hole in the floor. (O)
  • Click on the first tear. (P)
  • Scan the first tear with your scanner and then use the sealant to seal it up. The image shows the pattern on how to seal the first tear. (Q)
  • Find the second tear. Click on it. (R)

 

  • Scan the second tear with your scanner and then use the sealant to seal it up. The image shows the pattern on how to seal the second tear. (S)
  • Find the third tear. Click on it. (T)
  • Scan the third tear with your scanner and then use the sealant to seal it up. The image shows the pattern on how to seal the third tear. (U)
  • Find the fourth tear. Click on it. (V)

 

  • Scan the fourth with your scanner and then use the sealant to seal it up. The image shows the pattern on how to seal the fourth tear. (W)
  • Find the fifth and final tear. Click on it. (X)
  • Scan the fifth tear with your scanner and then use the sealant to seal it up. The image shows the pattern on how to seal the fifth tear. (Y)
  • Chapter Completed.

Chapter 9 – Journey Home

 

  • Click on the monitor. (A)
  • Remember the constellations in order from 1 to 4. These are going to be used to orientate through the tunnels below the room. (B)
  • Go through the hole on the floor. (C)
  • Click on the constellation on the left. (D)

 

  • Click on the constellation on the left. (E)
  • Click on the constellation on the right. (F)
  • Click on the constellation on the middle. (G)
  • Collect the instruction manual. (H)
  • Find the scissors. Collect the scissors. (I)
  • Find the wrench. Collect it. (J)
  • Find the instruction manuals. Collect them. When you collect the manuals, a clue behind them will appear. Click on it. (K)

 

  • Every letter has it’s each symbol. Remember the symbols for each letter. (L)
  • Click on the next clue. (M)
  • We need to depressurize the room. Notice the letters in yellow, D P and Z. Remember the symbols for these three letters as you are going to use them for the next puzzle. (N)
  • Click on the puzzle. (O)
  • Enter the three symbols which correspond to the letters D, P and Z in order. (P)

 

  • Use the scissors in order to remove the tarp on the right.
  • Collect the fourth instruction manual. (Q)
  • Collect the fifth instruction manual. (R)
  • Use the wrench to remove the panel. Click on the parachute ropes to activate the puzzle. (S)
  • Untangle the ropes on the parachute. The image shows an untangled parachute. (T)
  • Click on the puzzle. This one unlocks the door. (U)
  • Rotate it right past three bars, left past one bar , right past one bar then left past two bars. (V)
  • Go through the door you just unlocked.

 

  • Now we are into the final part of the game. In this part, you have to complete 5 minigames on a timer or the spaceship is going to crash and you will start all over again. Click on the notebook. (W)
  • The first minigame’s objective is to fix the three dials to match them to the clue on the notebook. You need to do it in under 29 seconds. (X)
  • The second minigame’s objective is to move the shuttle to the center of the axes. Rotate it to match the manual. (Y)
  • The third minigame’s objective is to move the sliders in order to make them match the manual. (Z)

  • The fourth minigame’s objective is to click the buttons that are shown on the manual. (A1)
  • In the last minigame of the final chapter, you have to match the three dials to the manual, you have to match the shuttles to the manual and then you have to click the 4 buttons that are shown on the manual. You have 49 seconds to do all of these actions or you will crash. (B1)
  • Game Completed.

Conclusion

Haiku Games has created a very interesting game filled with a variety of content. The puzzles are some of the most complex ones i have ever faced, and the clues and hints were very complex too, but clear and understandable. The game basically does the normal escape game mechanics perfectly, with it’s nice and fluid movement mechanics and interesting item usage. The unique challenges were the best parts of the game, you would go on a spacewalk, build a jetpack, use a robotic arm and you also had these really nice maze puzzles on Chapter 7! If you are looking for long, beautiful-looking escape games, this one will definitely not disappoint.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Leave a Reply

%d bloggers like this: